To increase the heat transfer from a wood burning stove fins are going to be attached to the metal chimney pipe

To increase the heat transfer from a wood burning stove fins are going to be attached to the metal

We Write Essays For Students

Tell us about your assignment and we will find the best writer for your paper

Write My Essay For Me

chimney pipe. The fins will be 3 cm wide at the base and have a thickness of approximately

2mm. The surface temperature of the pipe is 500°C, and the surrounding air temperature is

assumed to be a constant 25°C. Select a suitable material for the fins and also justify an

appropriate length. The material and length should be based an attempted to maximize heat

transfer and minimize cost. Assume a reasonable value for the convection heat transfer

coefficient.

Finding will be presented in a report with a memo cover sheet. A narrative including an

Introduction, Analysis Methods, Results, and Conclusions needs to be provided.

Introduction: Describe the problem and reason for the design.

Analysis Methods: Describe the methods used to analyze the problem. Include equations used

and any other tools used.

Results: Provide a dimensioned drawing of the design along with any results obtained from

calculations or other analysis methods. Such as heat transfer rates, cost of materials and

manufacturing, and payback period.

Conclusions: Provide a summary of the problem, analysis, and results. Lastly discuss the

method used to manufacture and attach the fins.

Notes:

The report must be created in a word processing program.

All drawings must be created with a computer aided drafting program.